Adirondack Ski Chair - Your Own Gear -

Clean out that Basement or Garage and Recycle!

 

Include your old skis or snowboards into your chair and help preserve those ski memories while recycling your gear.  Plus, you'll save 10% off if you supply all the gear!  You'll need 6 or 7 skis in total, 5 if they are wide powder boards, or 2 snowboards. 

 

You will need to ship or drop off your skis or boards at our shop location in Waterbury, VT for this option.  If you are local to our area, we are happy to arrange a pick-up for you as well.  More info on shipping skis can be found here, or by contacting us.

 

Typically we will put some design options together for you, send that off to you for your consideration before we cut anything up, so you know what we're doing for you.  The image to the left shows 3 design options we pulled together for a matching set of K2 chairs.  We use a critical eye for blending colors and graphics to end up with a well-coordinated final piece, and are happy to have your input to be sure you are satisfied with the final layout.

 

 

 
 
Option 2 was the preference for this pair of K2 chairs and stools...a fine choice...
ADK Chair with Your Gear
Sale Price: $329
 
Description
Add a Footstool
Price: $89
 
Add Penofin Finish
Price: $49
 
Unfinished Cedar
Penofin Exterior Stain on Cedar
Ski Tables Ski Benches Gifts for the Skier
Recycling Skis and Snowboards into Unique and Artful Creations
p: 802.324.1717       email: info@recycledskis.com
Ski Chairs icon-shopping-cart.gif gmsf_9-8-5001013.jpg Ski Furniture Kits Ski Coat Racks
       order       shipping       custom       about us        got skis?       customer service      FAQ       contact
All images and works copyright © 2006-present - Green Mountain Ski Furniture LLC, All Rights Reserved
Website design by MDK for "Starving Teacher Productions"
 
Custom built ski furniture and Adirondack Ski Chairs from recycled skis and snowboards, upcycled ski chair
 
Facebook Facebook Join the Mailing List
Green Mountain Ski Furniture
Waterbury, VT   USA    
 
phone:  802.324.1717     
email:info@recycledskis.com
Custom Payment
Shipping & Delivery
Contact
About 
FAQ
Our Guarantee
Privacy Policy
Covid-19
 
Options
Custom Design Options include the following:
 
Ski or wood seat:  Have us use the ski tails in the rolled seat or save them for a footstool and go with an all wood seat.
 
Ski Arm Option:  Our standard design is with wooden arms, as we prefer the look, feel , and size of them.  However, if you want a little more ski look to your chair, ski arms might be for you. 
We can run one or two tails on each side, just let us know if this is a look you'd prefer.
 
Finishing:  Our chairs come in unfinished cedar wood.  Cedar is very rot resistant on its own but will weather to a soft gray over time.  More about cedar here.  If you want to prevent this or add some additional protection to the wood, we recommed a finish.  Finish option details are listed here, and you can add the Penofin exterior stain to your order above.  Color sample shown at left. 
 
Custom Sizing:   We have spent considerable time perfecting the geometry of our chair design to comfortably fit most frames.  However if yours is not "most frames" or you would like something else besides the standard, we can easily do that for you.  Any of the chair sizing can be modified to be smaller, larger, lower, wider, narrower, or the back angle can be adjusted to be a more upright chair if you prefer less of a back angle.

 

Our standard chair back will easily accommodate someone up to 6"3".  If you are taller than that, we recommend a back extension to allow a bit more room before the ski tips.